Pubblicare da locale un sito web

[efrite15]

Buongiorno a tutti, chiedo aiuto per una cosa che mi sta dannando da qualche giorno!
Ho un sito, funzionante perfettamente in locale (localhost/nomesito o ipmacchina/nomesito) che vorrei pubblicare in internet.
Ho già effettuato, dal mio router, il redirect della porta 80 sull'ip locale della macchina (Windows Xp Pro con XAMPP)e puntato i DNS verso il mio IP Pubblico (statico).
Peccato che non funzioni.... devo configurare apache in modo diverso...? Qualcuno sa aiutarmi?...

[Antonio]

Dipende da come è configurato il vhost di apache. Se posti qui la configurazione almeno gli si può dare una occhiata...

[efrite15]

Questo il contenuto del file "http_vhost.h" spero sia quello che volevi:

Spoiler

/* Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @file  http_vhost.h
 * @brief Virtual Host package
 *
 * @defgroup APACHE_CORE_VHOST Virtual Host Package
 * @ingroup  APACHE_CORE
 * @{
 */

#ifndef APACHE_HTTP_VHOST_H
#define APACHE_HTTP_VHOST_H

#ifdef __cplusplus
extern "C" {
#endif

/**
 * called before any config is read
 * @param p Pool to allocate out of
 */
AP_DECLARE(void) ap_init_vhost_config(apr_pool_t *p);

/**
 * called after the config has been read to compile the tables needed to do 
 * the run-time vhost lookups
 * @param p The pool to allocate out of
 * @param main_server The start of the virtual host list
 */
AP_DECLARE(void) ap_fini_vhost_config(apr_pool_t *p, server_rec *main_server);

/**
 * handle addresses in "<VirtualHost>" statement
 * @param p The pool to allocate out of
 * @param hostname The hostname in the VirtualHost statement
 * @param s The list of Virtual Hosts.
 */
const char *ap_parse_vhost_addrs(apr_pool_t *p, const char *hostname, server_rec *s);

/**
 * handle NameVirtualHost directive 
 * @param cmd Command Parameters structure
 * @param dummy NOT USED
 * @param arg a host of the form "<address>[:port]"
 */
const char *ap_set_name_virtual_host (cmd_parms *cmd, void *dummy,
                      const char *arg);

/**
 * Callback function for every Name Based Virtual Host.
 * @param baton Opaque user object
 * @param conn The current Connection
 * @param s The current Server
 * @see ap_vhost_iterate_given_conn
 * @return 0 on success, any non-zero return will stop the iteration.
 */
typedef int(*ap_vhost_iterate_conn_cb)(void* baton, conn_rec* conn, server_rec* s);
                
/**
 * For every virtual host on this connection, call func_cb.
 * @param conn The current connection
 * @param func_cb Function called for every Name Based Virtual Host for this 
 *                connection.
 * @param baton Opaque object passed to func_cb.
 * @return The return value from func_cb.
 * @note If func_cb returns non-zero, the function will return at this point, 
 *       and not continue iterating the virtual hosts.
 */
AP_DECLARE(int) ap_vhost_iterate_given_conn(conn_rec *conn,
                                            ap_vhost_iterate_conn_cb func_cb,
                                            void* baton);

/**
 * given an ip address only, give our best guess as to what vhost it is 
 * @param conn The current connection
 */
AP_DECLARE(void) ap_update_vhost_given_ip(conn_rec *conn);

/**
 * ap_update_vhost_given_ip is never enough, and this is always called after 
 * the headers have been read.  It may change r->server.
 * @param r The current request
 */
AP_DECLARE(void) ap_update_vhost_from_headers(request_rec *r);

/**
 * Match the host in the header with the hostname of the server for this
 * request.
 * @param r The current request
 * @param host The hostname in the headers
 * @param port The port from the headers
 * @return return 1 if the host:port matches any of the aliases of r->server,
 * return 0 otherwise
 */
AP_DECLARE(int) ap_matches_request_vhost(request_rec *r, const char *host,
    apr_port_t port);

#ifdef __cplusplus
}
#endif

#endif    /* !APACHE_HTTP_VHOST_H */
/** @} */ 

[Antonio]

Questo il contenuto del file "http_vhost.h" spero sia quello che volevi:

Quello è un header file in c dei sorgenti di apache. Serve il file di configurazione di apache

E' apache.conf o vhost.conf et similia.

[efrite15]

hem hem hem... i tuoi mica li trovo... ci sarebbe "httpd.conf"

Spoiler

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/xampp/apache" will be interpreted by the
# server as "C:/xampp/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "C:/xampp/apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 0.0.0.0:80
#Listen [::]:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
##LoadModule autoindex_module modules/mod_autoindex.so # replaced with autoindex_color_module
#LoadModule bucketeer_module modules/mod_bucketeer.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule case_filter_module modules/mod_case_filter.so
#LoadModule case_filter_in_module modules/mod_case_filter_in.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
LoadModule dav_module modules/mod_dav.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
LoadModule env_module modules/mod_env.so
#LoadModule example_module modules/mod_example.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so

#
# 3rd party modules
#
LoadModule autoindex_color_module modules/mod_autoindex_color.so

<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin postmaster@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/xampp/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "C:/xampp/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks Includes ExecCGI

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride All

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.php index.pl index.cgi index.asp index.shtml index.html index.htm 
                   default.php default.pl default.cgi default.asp default.shtml default.html default.htm 
                   home.php home.pl home.cgi home.asp home.shtml home.html home.htm
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"

#ScriptLog "logs/cgi.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    #CustomLog "logs/access.log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    CustomLog "logs/access.log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://localhost/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "C:/xampp/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock "logs/cgi.sock"
</IfModule>

#
# "C:/xampp/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:/xampp/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig "conf/mime.types"

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    AddHandler cgi-script .cgi .pl .asp

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml
</IfModule>

<IfModule mime_magic_module>
    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #
    MIMEMagicFile "conf/magic"
</IfModule>

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# XAMPP specific settings
Include "conf/extra/httpd-xampp.conf"

# Perl settings
Include "conf/extra/perl.conf"

# Server-pool management (MPM specific)
Include "conf/extra/httpd-mpm.conf"

# Multi-language error messages
Include "conf/extra/httpd-multilang-errordoc.conf"

# Fancy directory listings
Include "conf/extra/httpd-autoindex.conf"

# Language settings
Include "conf/extra/httpd-languages.conf"

# User home directories
Include "conf/extra/httpd-userdir.conf"

# Real-time info on requests and configuration
Include "conf/extra/httpd-info.conf"

# Virtual hosts
Include "conf/extra/httpd-vhosts.conf"

# Distributed authoring and versioning (WebDAV)
Include "conf/extra/httpd-dav.conf"

# Implements a proxy/gateway for Apache.
Include "conf/extra/httpd-proxy.conf"

# Various default settings
Include "conf/extra/httpd-default.conf"

# Secure (SSL/TLS) connections
Include "conf/extra/httpd-ssl.conf"
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    SSLSessionCache "shmcb:logs/ssl.scache(512000)"
    SSLSessionCacheTimeout 300
</IfModule> 

potrebbe essere quello? Io apache l'ho installato tramite Xampp e non manualmente... ...

[Antonio]

hem hem hem... i tuoi mica li trovo... ci sarebbe "httpd.conf"
cut...
potrebbe essere quello? Io apache l'ho installato tramite Xampp e non manualmente... ...

Quello è il file di conf principale di apache, dal quale leggo:

# Virtual hosts
Include "conf/extra/httpd-vhosts.conf"

vedi se hai quel file.

[efrite15]

Ok, quello ce l'ho

Spoiler

#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at 
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
##NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#
##<VirtualHost *:80>
    ##ServerAdmin postmaster@dummy-host.localhost
    ##DocumentRoot "C:/xampp/htdocs/dummy-host.localhost"
    ##ServerName dummy-host.localhost
    ##ServerAlias www.dummy-host.localhost
    ##ErrorLog "logs/dummy-host.localhost-error.log"
    ##CustomLog "logs/dummy-host.localhost-access.log" combined
##</VirtualHost>

##<VirtualHost *:80>
    ##ServerAdmin postmaster@dummy-host2.localhost
    ##DocumentRoot "C:/xampp/htdocs/dummy-host2.localhost"
    ##ServerName dummy-host2.localhost
    ##ServerAlias www.dummy-host2.localhost
    ##ErrorLog "logs/dummy-host2.localhost-error.log"
    ##CustomLog "logs/dummy-host2.localhost-access.log" combined
##</VirtualHost> 

[efrite15]

up ..

[Uno]

Al prossimo up, se non sono passati almeno un paio di giorni chiudiamo il thread.

[Antonio]

Leggiti questo: Apache Virtual Host documentation - Apache HTTP Server

[efrite15]

Al prossimo up, se non sono passati almeno un paio di giorni chiudiamo il thread.

Ho spulciato il regolamento e non ho trovato niente a proposito.
Ho utilizzato le regole in voga su molti forum, fra cui hwupgrade, che danno come limite un Up al giorno, non pensavo certo fosse un problema.
Comunque si potrebbe essere più garbati ...

Leggiti questo: Apache Virtual Host documentation - Apache HTTP Server

Qui spiega come avere due siti su uno stesso pc... ma io di sito ne ho uno solo...

[Uno]

Comunque si potrebbe essere più garbati ...

Si potrebbe si, quando non si apre il forum e si trova che la nuova moda è l'up (non è ovviamente cosa tua/solo tua, ma sei capitato dentro) per domande tipo help desk sistemistico che dal regolamento è vietato ed invece stiamo lasciando passare.

[Alex]

ergo ne configurerai solo metà

[c1p8it]

Come prima cosa buondi mi sono registrato ora ora
Se hai un solo sito come dici tu che ce fai con il virtualhost?
Approfitto di questo post per chiedere una info
io ho un serverino amatoriale online come posso testare la sua sicurezza e/o chi puo provare nel bucarlo :P do il permesso
Se ho il permesso posto il link del sito
NB: no distruggerlo solo bucarlo grazie

[Antonio]

Come prima cosa buondi mi sono registrato ora ora
Se hai un solo sito come dici tu che ce fai con il virtualhost?
Approfitto di questo post per chiedere una info
io ho un serverino amatoriale online come posso testare la sua sicurezza e/o chi puo provare nel bucarlo :P do il permesso
Se ho il permesso posto il link del sito
NB: no distruggerlo solo bucarlo grazie

Guarda che i security audit solitamente si pagano (ed anche molto caro, se il professionista sa il fatto suo) e non penso trovarai persone che perdono le ore a tentare di buttarti giù

Al limite scaricati backtrack e prova a fare un pò di auditing da solo